Arm Cortex-M0+|Kinetis KE1xZ 32-bit 5V MCUs with Touch Interface

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Roll over image to zoom in

KE1xZ MCUs are based on the Arm®Cortex®-M0+ core, running up to 96 MHz. These MCUs support up to 512 KB flash, 96 KB RAM, and a complete set of analog/digital features. The robust TSI module with up to 50 channels provides a high level of stability and accuracy to any HMI system. The 1-Msps ADC and FlexTimer modules provide an ideal solution for BLDC motor-control systems.

The MSCAN IP is ideal for the CAN node control and auto after car market applications.

This device is fully supported by NXP's MCUXpresso Software and Tools, a comprehensive and cohesive set of free software development tools for Kinetis, LPC and i.MX RT microcontrollers. MCUXpresso SDK also includes project files for Keil MDK and IAR Embedded Workbench for Arm.

Data Sheet

Reference Manual

Product Details

Block Diagram

Kinetis KE1xZ MCU Family

Get diagram PDF

Features

Up to 96 MHz Cortex-M0+ core supporting a broad range of processing bandwidth requirements while maintaining excellent cost-effectiveness, easy to use packages and a wide range of memory densities
Enhanced robust IOs make sure the high performance under noisy environment
Robust TSI supports both mutual cap mode and self-cap mode, providing flexibility for up to 72 touch keys
Implementation of CAN protocol - Version 2.0A/B, support both standards and extended data frames, up to 1Mbps data rate
Flextime featured up to 8ch PWM supports 3-phase motor control with dead time insertion and fault detect
1MSPS 12b ADC with up to 24ch input per module provides fast sampling rate for prompt data conversion and storage
Analog comparator for fast response to external analog change
Programmable delay block with flexible trigger system providing various interconnections for on-chip modules, ADC, DAC, Flextimers, CMP, etc
FlexIO provides flexibility for serial communication interface implementation
Boot ROM provides on-chip boot code and serial port drivers that could save flash space and provide flexible boot options and in system programming support
Faster time to market with comprehensive enablement solutions, including SDK (drivers, libraries, stacks), IDE, bootloader, RTOS, online community and more
Supported by MCUXpresso SDK, IDE and Config Tools

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

1-5of 17 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
KE17Z IBIS Model

7ZRev 1.0Mar 2, 2022 09:22:00116.4 KBKE17Z_IBIS
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE16Z IBIS Model

IBSRev 1.0Jan 8, 2024 10:48:00916.8 KBKE16Z_48LQFP
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE16Z IBIS Model

IBSRev 1.0Jan 8, 2024 10:54:00916.2 KBKE16Z_44LQFP
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE15Z IBIS Model

IBSRev 1.0Apr 11, 2022 08:13:00KE15Z_64LQFP10x10-IBIS
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE14Z IBIS Model

IBSRev 1.0Apr 11, 2022 16:55:00KE14Z_64LQFP10x10-IBIS
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE14Z IBIS Model

IBSRev 1.0Apr 11, 2022 17:03:00KE14Z_100LQFP14x14-IBIS
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE15Z IBIS Model

IBSRev 1.0Apr 11, 2022 08:17:00KE15Z_100LQFP14x14-IBIS
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
KE17Z/13Z/12Z512 IBIS Model

ZIPRev 0Apr 12, 2024 11:46:00412.5 KBKE17Z_13Z_12Z512_IBIS
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE12Z512VLL9

BXLRev 0Apr 12, 2024 11:30:00167.6 KBMKE12Z512VLL9
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Kinetis^® Symbols, Footprints and Models

INTERNALRev 1.0Nov 27, 2017 11:23:001 KBCAD-SYMBOLFOOTPRINTS

Download
Symbols and Footprints
Symbols and Footprints for MKE17Z256VLH7

BXLRev 0Mar 2, 2022 09:40:00284.3 KBMKE17Z256VLH7
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE13Z512VLL9

BXLRev 0Apr 12, 2024 11:30:00167.6 KBMKE13Z512VLL9
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE17Z256VLL7

BXLRev 0Mar 2, 2022 09:38:00414.7 KBMKE17Z256VLL7
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE17Z512VLL9

BXLRev 0Apr 12, 2024 11:30:00167.6 KBMKE17Z512VLL9
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE13Z512VLH9

BXLRev 0Apr 12, 2024 11:30:0098.4 KBMKE13Z512VLH9
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE12Z512VLH9

BXLRev 0Apr 12, 2024 11:30:0098.4 KBMKE12Z512VLH9
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
Symbols and Footprints for MKE17Z512VLH9

BXLRev 0Apr 12, 2024 11:30:0098.4 KBMKE17Z512VLH9
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Show All

Hardware

Quick reference to our board types.

1-5 of 17 hardware offerings

Adapters, Cables, Sockets
Touch Module for Freedom BoardFeatured
Active

FRDM-TOUCH
Evaluation and Development Boards
FRDM Development Platform for 48MHz KE1xZ64/32 MCUsFeatured

FRDM-KE16Z
Evaluation and Development Boards
FRDM Development Platform for Kinetis^® KE1xMCUsFeatured
Active

FRDM-KE15Z
Additional hardware available. View our featured partner solutions.
Evaluation and Development Boards
FRDM Development Board for 96 MHz KE17Z/KE13Z/KE12Z with 512 KB Flash MCUsFeatured
Preproduction

FRDM-KE17Z512
Evaluation and Development Boards
Freedom Development Platform for 72MHz KE17Z/KE13Z/KE12Z MCUsFeatured
Active

FRDM-KE17Z
Complete Solution
A Touch Sensing Demo Based on KE17Z

KE17Z-TOUCH-SENSING
Design Concept
Touch Board

TOUCHBRD
Emulators, Probes, and Programmers
Universal Multilink Development Interface
Active

UMultilink
Emulators, Probes, and Programmers
MCU-Link Debug Probe
Active

MCU-LINK
Emulators, Probes, and Programmers
LPC-Link2
Active

OM13054
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
Active

U-MULTILINK-FX
Emulators, Probes, and Programmers
PEmicro Cyclone programmer
Active

CYCLONE
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Emulators, Probes, and Programmers
MCU-Link Pro Debug Probe
Active

MCU-LINK-PRO
Evaluation and Development Boards
MPC560x Calibration, Debug and Interface Boards
Active

MPC560xBOARDS
Evaluation and Development Boards
MCU-LINK-MR Debug Probe with USB-C, Serial and Mobile Robotics Interfaces
Active

MCU-LINK-MR
Reference Design
3-Phase PMSM Control

PERMANENT-MAGNET-MOTOR

Show All

1-5 of 11 hardware offerings

Test Accessories and Debugger
Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the program...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher Portable PLUS

Flasher Portable PLUS is an extremely portable flash programmer, specifically designed to meet the needs of production-grade flash programming in the field.

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link PRO PoE

J-Link PRO PoE is a specialized programming / debug probe for creating test farms. It can draw power via Ethernet and supplies power to the target either via debug interf...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link PRO

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This ...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher Hub-12

The Flasher Hub-12 controls up to 12 Flasher Compacts so that they program simultaneously, creating a powerful gang programmer for efficient high-speed parallel programmi...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link EDU Mini

The J-Link EDU Mini is a stripped-down, budget-friendly model of the J-Link debug probe created for educational use. Even with its reduced size, it maintains most J-Link ...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher PRO

Flasher PRO is SEGGER’s “almost-anything” flash programmer for microcontrollers, SoCs, and (Q)SPI flashes.

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher ATE

Flasher ATE is perfectly suited for high volume mass production environments.

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
I-jet

I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is full...

By IAR Platinum Partner
Test Accessories and Debugger
J-Link ULTRA+

The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Brea...

By SEGGER Microcontroller GmbH Gold Partner