16/32-bit Arm® microcontrollers; flashless, with 10-bit ADC and external memory interface

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC2210/2220 microcontrollers are based on a 16/32-bit Arm7TDMI-S^™ CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 pct with minimal performance penalty.

With their 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, PWM channels, and up to nine external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. The LPC2210/2220 can provide up to 76 GPIOs depending on bus configuration. With a wide range of serial communications interfaces, it is also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.

Remark:Throughout the data sheet, the term LPC2210/2220 will apply to devices with and without the /01 suffix. The /01 suffix will be used to differentiate LPC2210 devices only when necessary.

See product image

Data Sheet

Application Notes

Product Details

Block Diagram

Block diagram: LPC2210FBD144, LPC2220FBD144, LPC2220FET144

Get diagram PDF

Features

16/32-bit Arm7TDMI-S^™ microcontroller in a LQFP144 and TFBGA144 package.
16/64 kB on-chip static RAM (LPC2210/2220).
Serial bootloader using UART0 provides in-system download and programming capabilities.
EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high-speed real-time tracing of instruction execution.
Eight channel 10-bit ADC with conversion time as low as 2.44 us.
- LPC2210/01 and LPC2220 only: Dedicated result registers for ADC(s) reduce interrupt overhead. The ADC pads are 5 V tolerant when configured for digital I/O function(s).
Two 32-bit timers (LPC2220 and LPC2210/01 also external event counters) with four capture and four compare channels, PWM unit (six outputs), Real-Time Clock (RTC), and watchdog.
Multiple serial interfaces including two UARTs (16C550), Fast I²C-bus (400 kbit/s) and two SPIs.
- LPC2210/01 and LPC2220 only: A Synchronous Serial Port (SSP) with data buffers and variable length transfers can be selected to replace one SPI.
- LPC2210/01 and LPC2220 only: UART0/1 include fractional baud rate generator, auto-bauding capabilities, and handshake flow-control fully implemented in hardware.
Vectored Interrupt Controller (VIC) with configurable priorities and vector addresses.
Configurable external memory interface with up to four banks, each up to 16 MB and 8/16/32-bit data width.
Up to 76 general purpose pins (5 V tolerant) capable. Up to nine edge/level sensitive external interrupt pins available.
- LPC2210/01 and LPC2220 only: Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device. They also allow for a port pin to be read at any time regardless of its function.
60 MHz (LPC2210) and 75 MHz (LPC2210/01 and LPC2220) maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100 us.
On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz and with external oscillator up to 25 MHz.
Power saving modes include Idle and Power-down.
Processor wake-up from Power-down mode via external interrupt.
Individual enable/disable of peripheral functions for power optimization.
Dual power supply:
- CPU operating voltage range of 1.65 V to 1.95 V (1.8 V +- 0.15 V).
- I/O power supply range of 3.0 V to 3.6 V (3.3 V +- 10 pct) with 5 V tolerant I/O pads. 16/32-bit Arm7TDMI-S processor.

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Documentation

Quick reference to our documentation types.

1-10 of 29 documents

Compact List

Brushless DC motor control using the LPC2141[AN10661]

PDFFeb 15, 2017Rev 1.0
Guidelines for full-speed USB on NXP's LPC microcontrollers[AN11392]

PDFFeb 20, 2014Rev 1.1
Connecting NXP Arm^®-based microcontroller LPC2200 to small page NAND flash[AN10600]

ZIPJul 21, 2013Rev 2.0
Using IAP for LPC2000 Arm^® devices[AN10256]

PDFJul 21, 2013Rev 1.0
UUencoding for UART ISP[AN11229]

PDFJul 6, 2012Rev 1.0
PCB layout guidelines for NXP^® MCUs in BGA packages[AN10778]

PDFApr 22, 2011Rev 2.0
Using the Philips LPC2000 Flash utility with the Keil MCB2100 and IAR LPC210x Kickstart evaluation boards[AN10302]

PDFFeb 16, 2010Rev 4.0
Migrating to the LPC1700 series[AN10878]

PDFOct 6, 2009Rev 1.0
NicheLite for LPC implementation notes[AN10775]

PDFJul 16, 2009Rev 1.0
Full-duplex software UART for LPC2000[AN10689]

PDFJan 18, 2008Rev 1.0
uC/OS-II Time Management in LPC2000[AN10413]

PDFJul 18, 2007Rev 1.0
Realizing an MP3 player with the LPC2148, using libmad and EFSL[AN10583]

PDFApr 23, 2007Rev 1.0
Getting started uClinux with LPC22xx[AN10389]

PDFFeb 16, 2007Rev 1.0
Connecting ethernet interface with LPC2000[AN10403]

PDFFeb 9, 2007Rev 1.0
Migrating to the LPC2300/2400 family[AN10576]

PDFFeb 5, 2007Rev 1.0
Brushed DC motor control using the LPC2101[AN10513]

PDFJan 15, 2007Rev 1.0
Getting started with LPC288x[AN10548]

PDFJan 9, 2007Rev 1.0
Power management for LPC2138[AN10421]

PDFJan 6, 2006Rev 1.0
Handling of spurious interrupts in the LPC2000[AN10414]

PDFJan 4, 2006Rev 1.0
Initialization code/hints for the LPC2000 family[AN10404]

PDFNov 1, 2005Rev 1.0
Nesting of interrupts in the LPC2000[AN10381]

PDFJun 6, 2005Rev 1.0

Arm7-based MCUs for memory-intensive applications[LPC22X0]

PDFFeb 28, 2007Rev 1.0

16/32-bit Arm^® microcontrollers; flashless, with 10-bit ADC and external memory interface[LPC2210_2220]

PDFDec 10, 2008Rev 6.0

Errata sheet LPC2220[ES_LPC2220]

PDFMay 5, 2011Rev 2.0

plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm[SOT486-1]

PDFFeb 8, 2016Rev 1.0

Footprint for wave soldering[HTQFP-HLQFP-LQFP-MSQFP-WAVE]

PDFOct 8, 2009Rev 1.0
Footprint for wave soldering[SSOP-TSSOP-VSO-WAVE]

PDFOct 8, 2009Rev 1.0
LPC21xx/22xx, 2104/5/6 revision defect (with software)[TN08003]

ZIPOct 12, 2008Rev 1.0

LPC21xx and LPC22xx User manual[UM10114]

PDFMay 24, 2012Rev 4.0

Design Resources

Design Files

Quick reference to our design files types.

1 design file

Receive the full breakdown. See the product footprint and more in the eCad file.

Symbols and Footprints
LPC2xxx ORCAD symbols

ZIPRev 0Jun 3, 2016 00:00:0013.1 KBLPC2000-ORCAD-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Software

Quick reference to our software types.

1 software file

BSPs and Device Drivers
uboot_1

PDFRev 0.1Apr 30, 2018 12:37:00155.6 KBuboot_1
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Note: For better experience, software downloads are recommended on desktop.

16/32-bit Arm® microcontrollers; flashless, with 10-bit ADC and external memory interface

Product Details

Block Diagram

Block diagram: LPC2210FBD144, LPC2220FBD144, LPC2220FET144

Features

Buy/Parametrics

Documentation

Filter by

Application Note (21)

Brushless DC motor control using the LPC2141[AN10661]

Guidelines for full-speed USB on NXP's LPC microcontrollers[AN11392]

Connecting NXP Arm®-based microcontroller LPC2200 to small page NAND flash[AN10600]

Using IAP for LPC2000 Arm® devices[AN10256]

UUencoding for UART ISP[AN11229]

PCB layout guidelines for NXP® MCUs in BGA packages[AN10778]

Using the Philips LPC2000 Flash utility with the Keil MCB2100 and IAR LPC210x Kickstart evaluation boards[AN10302]

Migrating to the LPC1700 series[AN10878]

NicheLite for LPC implementation notes[AN10775]

Full-duplex software UART for LPC2000[AN10689]

uC/OS-II Time Management in LPC2000[AN10413]

Realizing an MP3 player with the LPC2148, using libmad and EFSL[AN10583]

Getting started uClinux with LPC22xx[AN10389]

Connecting ethernet interface with LPC2000[AN10403]

Migrating to the LPC2300/2400 family[AN10576]

Brushed DC motor control using the LPC2101[AN10513]

Getting started with LPC288x[AN10548]

Power management for LPC2138[AN10421]

Handling of spurious interrupts in the LPC2000[AN10414]

Initialization code/hints for the LPC2000 family[AN10404]

Nesting of interrupts in the LPC2000[AN10381]

Brochure (1)

Arm7-based MCUs for memory-intensive applications[LPC22X0]

Data Sheet (1)

16/32-bit Arm® microcontrollers; flashless, with 10-bit ADC and external memory interface[LPC2210_2220]

Errata (1)

Errata sheet LPC2220[ES_LPC2220]

Package Information (1)

plastic low profile quad flat package; 144 leads; body 20 x 20 x 1.4 mm[SOT486-1]

Supporting Information (3)

Footprint for wave soldering[HTQFP-HLQFP-LQFP-MSQFP-WAVE]

Footprint for wave soldering[SSOP-TSSOP-VSO-WAVE]

LPC21xx/22xx, 2104/5/6 revision defect (with software)[TN08003]

User Guide (1)

LPC21xx and LPC22xx User manual[UM10114]

Design Resources

Design Files

Filter by

LPC2xxx ORCAD symbols

Filter By

Software

Filter by

uboot_1

Filter By

Support

What do you need help with?

Suggested Links

16/32-bit Arm^® microcontrollers; flashless, with 10-bit ADC and external memory interface

Connecting NXP Arm^®-based microcontroller LPC2200 to small page NAND flash[AN10600]

Using IAP for LPC2000 Arm^® devices[AN10256]

PCB layout guidelines for NXP^® MCUs in BGA packages[AN10778]

16/32-bit Arm^® microcontrollers; flashless, with 10-bit ADC and external memory interface[LPC2210_2220]