LPC4357JBD208|Arm Cortex-M4/M0|32-bit MCU

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC435x/3x/2x/1x are Arm Cortex-M4 based microcontrollers for embedded applications which include an Arm Cortex-M0 coprocessor, up to 1 MB of flash and 136 kB of on-chip SRAM, 16 kB of EEPROM memory, a quad SPI Flash Interface (SPIFI), advanced configurable peripherals such as the State Configurable Timer (SCT) and the Serial General Purpose I/O (SGPIO) interface, two High-speed USB controllers, Ethernet, LCD, an external memory controller, and multiple digital and analog peripherals. The LPC435x/3x/2x/1x operate at CPU frequencies of up to 204 MHz.

The Arm Cortex-M4 is a next generation 32-bit core that offers system enhancements such as low power consumption, enhanced debug features, and a high level of support block integration. The Arm Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals, and includes an internal prefetch unit that supports speculative branching. The Arm Cortex-M4 supports single-cycle digital signal processing and SIMD instructions. A hardware floating-point unit is integrated in the core.

The Arm Cortex-M0 coprocessor is an energy-efficient and easy-to-use 32-bit core which is upward code- and tool-compatible with the Cortex-M4 core. The Cortex-M0 coprocessor, designed as a replacement for existing 8/16-bit microcontrollers, offers up to 204 MHz performance with a simple instruction set and reduced code size.

See product image

Data Sheet

Application Notes

Product Details

Features

Cortex-M4 Processor core
- Arm Cortex-M4 processor, running at frequencies of up to 204 MHz
- Arm Cortex-M4 built-in Memory Protection Unit (MPU) supporting eight regions
- Arm Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC)
- Hardware floating-point unit
- Non-maskable Interrupt (NMI) input
- JTAG and Serial Wire Debug (SWD), serial trace, eight breakpoints, and four watch points
- Enhanced Trace Module (ETM) and Enhanced Trace Buffer (ETB) support
- System tick timer
Cortex-M0 Processor core
- Arm Cortex-M0 co-processor capable of off-loading the main Arm Cortex-M4 application processor
- Running at frequencies of up to 204 MHz
- JTAG
- Built-in NVIC
On-chip memory
- Up to 1 MB on-chip dual bank flash memory with flash accelerator
- 16 kB on-chip EEPROM data memory
- 136 kB SRAM for code and data use
- Multiple SRAM blocks with separate bus access. Two SRAM blocks can be powered down individually
- 64 kB ROM containing boot code and on-chip software drivers
- 64 bit of general-purpose One-Time Programmable (OTP) memory
Configurable digital peripherals
- Serial GPIO (SGPIO) interface
- State Configurable Timer (SCT) subsystem on AHB
- Global Input Multiplexer Array (GIMA) allows to cross-connect multiple inputs and outputs to event driven peripherals like the timers, SCT, and ADC0/1
Serial interfaces
- Quad SPI Flash Interface (SPIFI) with four lanes and up to 52 MB per second
- 10/100T Ethernet MAC with RMII and MII interfaces and DMA support for high throughput at low CPU load. Support for IEEE 1588 time stamping/advanced time stamping (IEEE 1588-2008 v2)
- One High-speed USB 2.0 Host/Device/OTG interface with DMA support and on-chip high-speed PHY
- One High-speed USB 2.0 Host/Device interface with DMA support, on-chip full-speed PHY and ULPI interface to external high-speed PHY
- USB interface electrical test software included in ROM USB stack
- One 550 UART with DMA support and full modem interface
- Three 550 USARTs with DMA and synchronous mode support and a smart card interface conforming to ISO7816 specification. One USART with IrDA interface
- Up to two C_CAN 2.0B controllers with one channel each. Use of C_CAN controller excludes operation of all other peripherals connected to the same bus bridge
- Two SSP controllers with FIFO and multi-protocol support. Both SSPs with DMA support
- One SPI controller
- One Fast-mode Plus I²C-bus interface with monitor mode and with open-drain I/O pins conforming to the full I²C-bus specification. Supports data rates of up to 1 Mbit/s
- One standard I²C-bus interface with monitor mode and with standard I/O pins
- Two I²S interfaces, each with DMA support and with one input and one output
Digital peripherals
- External Memory Controller (EMC) supporting external SRAM, ROM, NOR flash, and SDRAM devices
- LCD controller with DMA support and a programmable display resolution of up to 1024 H x 768 V. Supports monochrome and color STN panels and TFT color panels; supports 1/2/4/8 bpp Color Look-Up Table (CLUT) and 16/24-bit direct pixel mapping. Available on parts LPC4357/53 only
- Secure Digital Input Output (SD/MMC) card interface
- Eight-channel General-Purpose DMA controller can access all memories on the AHB and all DMA-capable AHB followers
- Up to 164 General-Purpose Input/Output (GPIO) pins with configurable pull-up/pull-down resistors
- GPIO registers are located on the AHB for fast access. GPIO ports have DMA support
- Up to eight GPIO pins can be selected from all GPIO pins as edge and level sensitive interrupt sources
- Two GPIO group interrupt modules enable an interrupt based on a programmable pattern of input states of a group of GPIO pins
- Four general-purpose timer/counters with capture and match capabilities
- One motor control Pulse Width Modulator (PWM) for three-phase motor control
- One Quadrature Encoder Interface (QEI)
- Repetitive Interrupt timer (RI timer)
- Windowed watchdog timer (WWDT)
- Ultra-low power Real-Time Clock (RTC) on separate power domain with 256 bytes of battery powered backup registers
- Alarm timer; can be battery powered
Analog peripherals
- One 10-bit DAC with DMA support and a data conversion rate of 400 kSamples/s
- Two 10-bit ADCs with DMA support and a data conversion rate of 400 kSamples/s. Up to eight input channels per ADC
Unique ID for each device
Clock generation unit
- Crystal oscillator with an operating range of 1 MHz to 25 MHz
- 12 MHz internal RC oscillator trimmed to 2 % accuracy over temperature and voltage (1 % accuracy for T_amb = 0 °C to 85 °C)
- Ultra-low power Real-Time Clock (RTC) crystal oscillator
- Three PLLs allow CPU operation up to the maximum CPU rate without the need for a high-frequency crystal. The second PLL can be used with the High-speed USB, the third PLL can be used as audio PLL
- Clock output
Power
- Single 3.3 V (2.2 V to 3.6 V) power supply with on-chip DC-to-DC converter for the core supply and the RTC power domain
- RTC power domain can be powered separately by a 3 V battery supply
- Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
- Processor wake-up from Sleep mode via wake-up interrupts from various peripherals
- Wake-up from Deep-sleep, Power-down, and Deep power-down modes via external interrupts and interrupts generated by battery powered blocks in the RTC power domain
- Brownout detect with four separate thresholds for interrupt and forced reset
- Power-On Reset (POR)
Available as LQFP208, LQFP144, LBGA256, or TFBGA100 packages

Target Applications

Motor control
Power management
White goods
RFID readers
Embedded audio applications
Industrial automation
e-metering

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

5 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
IBIS Model for LPC18xx and LPC43xx FET256-180-100

ZIPRev 1Sep 12, 2017 17:21:00309.9 KBIBIS_LPC18xx_43xxFET256

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
BSDL for LPC18xx and LPC43xx

ZIPRev 2Feb 27, 2018 11:57:00269.0 KBBSDL_LPC18XX_43XX

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
IBIS Model_LPC18xx_LPC43xxFBD208

ZIPRev 2Mar 25, 2020 16:19:00377.4 KBIBIS_LPC18xx_LPC43xxFBD208
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC43xx/LPC18xx Eagle symbols

ZIPRev 0Jun 3, 2016 00:00:0014.9 KBLPC43XX-EAGLE-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC18XX_43XX_SCH Orcad Symbols

ZIPRev 1.0Apr 30, 2018 12:37:0052.2 KBLPC18XX_43XX_SCH_1

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

1-5 of 6 hardware offerings

Evaluation and Development Boards
Hitex LPC4350 Evaluation boardFeatured
Active

OM13031
Emulators, Probes, and Programmers
Universal Multilink Development Interface
Active

UMultilink
Emulators, Probes, and Programmers
PEmicro Cyclone programmer
Active

CYCLONE
Additional hardware available. View our featured partner solutions.
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
Active

U-MULTILINK-FX
Evaluation and Development Boards
LPCXpresso4367 Development Board
Active

OM13088

Show All

Engineering Services

To get further assistance directly from NXP, please see our Engineering Services.

5 engineering services

Independent Design House (IDH)
Hardware Design Services

By TAGnology RFID GmbH GoldHQ: Voitsberg, AustriaSupporting Regions: EMEA
Independent Design House (IDH)
Debug Tool development

By Ashling Microsystems GoldHQ: Limerick, IrelandSupporting Regions: EMEA
Independent Design House (IDH)
Wireless and Antenna Design

By Bluewind GoldHQ: Castelfranco Veneto, ItalySupporting Regions: EMEA
Independent Design House (IDH)
Embedded Software Design

By TAGnology RFID GmbH GoldHQ: Voitsberg, AustriaSupporting Regions: EMEA
Independent Design House (IDH)
IDE development

By Ashling Microsystems GoldHQ: Limerick, IrelandSupporting Regions: EMEA