LPC1777FBD208|Arm Cortex-M3|32-bit MCU

Product Details

Features

Functional replacement for LPC23xx and 24xx family devices
Arm Cortex-M3 processor, running at frequencies of up to 120 MHz
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
Multilayer AHB matrix interconnect provides a separate bus for each AHB leader
Split APB bus allows for higher throughput
Cortex-M3 system tick timer, including an external clock input option
Standard JTAG test/debug interface, Serial Wire Debug and Serial WireTrace Port
Emulation trace module supports real-time trace
Boundary scan for simplified board testing
Non-maskable Interrupt (NMI) input
512 kB on-chip flash program memory
96 kB on-chip SRAM
4 kB on-chip EEPROM
In-System Programming (ISP) and In-Application Programming (IAP) capabilities
External Memory Controller (EMC)
Eight channel General Purpose DMA controller (GPDMA)
USB 2.0 full-speed dual port device/host/OTG controller with on-chip PHY and DMA
Five UARTs with fractional baud rate generation
Three SSP controllers with FIFO and multi-protocol capabilities
Three enhanced I2C-bus interfaces
I2S (Inter-IC Sound) interface for digital audio input or output
CAN controller with two channels
SD/MMC memory card interface
Up to 165 General Purpose I/O (GPIO) pins
Two external interrupt inputs configurable as edge/level sensitive
Four general purpose timers/counters
Quadrature encoder interface that can monitor one external quadrature encoder
Two standard PWM/timer blocks with external count input option
Real-Time Clock (RTC) with a separate power domain
Windowed Watchdog Timer (WWDT)
CRC Engine block
12-bit Analog-to-Digital Converter (ADC) with conversion rates up to 400 kHz
10-bit Digital-to-Analog Converter (DAC)
Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down
Wake-up Interrupt Controller (WIC)
Processor wake-up from Power-down mode via any interrupt
Brownout detect with separate threshold for interrupt and forced reset
On-chip Power-On Reset (POR)
On-chip crystal oscillator with an operating range of 1 MHz to 25 MHz
12 MHz Internal RC oscillator (IRC) trimmed to 1% accuracy
Unique device serial number for identification purposes
Single 3.3 V power supply (2.4 V to 3.6 V)

Target Applications

eMetering
Lighting
Industrial networking
Alarm systems
White goods
Motor control

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

1-5of 6 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
BSDL for LPC177x and LPC178x

ZIPRev 1Jun 13, 2017 11:57:009.6 KBBSDL_LPC177X-LPC178X-LQFP
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
IBIS models for LPC178x pkg LQFP-208

/SECURED/ASSETS/DOWNLOADS/EN/IBIS-MODEL/IBIS_LPC177X_LPC178X_LQFP-208Rev 1Jun 13, 2017 16:19:0082.5 KBIBIS_LPC177x_LPC178x_LQFP-208

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
IBIS models for LPC178x pkg TFBGA-208

ZIPRev 1Jun 13, 2017 16:19:0082.6 KBIBIS_LPC177x,_LPC178x_TFBGA-208
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
BSDL for LPC177x and LPC178x pkg TFBGA

ZIPRev 1Jun 13, 2017 11:57:009.7 KBBSDL_LPC177X-LPC178X-TFBGA
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
BSDL for LPC177x and LPC178x pkg TFBGA180

ZIPRev 1Jun 13, 2017 11:57:0086.9 KBBSDL_LPC177X_8X-TFBGA180
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
BSDL for LPC177x and LPC178x pkg LQFP144

ZIPRev 1Jun 13, 2017 11:57:008.7 KBBSDL_LPC177X_8x_LQFP144
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Show All

Hardware

Quick reference to our board types.

1-5 of 8 hardware offerings

Emulators, Probes, and Programmers
Universal Multilink Development Interface
Active

UMultilink
Emulators, Probes, and Programmers
MCU-Link Debug Probe
Active

MCU-LINK
Emulators, Probes, and Programmers
PEmicro Cyclone programmer
Active

CYCLONE
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Emulators, Probes, and Programmers
LPC-Link2
Active

OM13054
Emulators, Probes, and Programmers
MCU-Link Pro Debug Probe
Active

MCU-LINK-PRO
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
Active

U-MULTILINK-FX
Evaluation and Development Boards
LPCXpresso board for LPC1769 with CMSIS DAP probe
Active

OM13085

Show All

Software

Quick reference to our software types.

5 software files

Development IDEs and Build Tools
MCUXpresso Integrated Development Environment (IDE)Featured

Download Options
BSPs and Device Drivers
Open-CMSIS-Packs

Download Options
Code Snippets
AN10859 - LPC1700 Ethernet MII Management (MDIO) via software

ZIPRev 1.0Sep 17, 2012 00:00:001.1 MBAN10859

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Additional software available. View our featured partner solutions.
Examples and Quick Start Software
MCUXpresso Software Development Kit (SDK)

Download Options
Debugging and Visualization Tools
LinkServer for Microcontrollers

Download Options

Note: For better experience, software downloads are recommended on desktop.

Engineering Services

To get further assistance directly from NXP, please see our Engineering Services.

3 engineering services

Independent Design House (IDH)
Debug Tool development

By Ashling Microsystems GoldHQ: Limerick, IrelandSupporting Regions: EMEA
Independent Design House (IDH)
Wireless and Antenna Design

By Bluewind GoldHQ: Castelfranco Veneto, ItalySupporting Regions: EMEA
Independent Design House (IDH)
IDE development

By Ashling Microsystems GoldHQ: Limerick, IrelandSupporting Regions: EMEA

To find additional partner offerings that support this product, visit our Partner Marketplace.

Training

9 trainings

On-Demand
CANopen

2By port industrial automation GmbH Gold Partner

On-Demand
Advanced wolfSSL for Embedded Security

12 hrBy AC6-Training Gold Partner

On-Demand
Developing with Arm Cortex-M

35 hrBy Doulos Ltd Gold Partner

On-Demand
wolfSSL for Embedded Security

18 hrBy AC6-Training Gold Partner

On-Demand
C++ Programming for Embedded Systems ONLINE

30 hrBy Doulos Ltd Gold Partner

On-Demand
Advanced Embedded Systems Security

12 hrBy AC6-Training Gold Partner

On-Demand
C Programming for Embedded Systems ONLINE

30 hrBy Doulos Ltd Gold Partner

On-Demand
Writing Secure C/C++ code

18 hrBy AC6-Training Gold Partner

On-Demand
Embedded System Security for C/C++ Developers ONLINE

24 hrBy Doulos Ltd Gold Partner

Show All

Scalable Mainstream 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core

Product Details

Features

Target Applications

Applications

Automotive

Consumer

Industrial

Buy/Parametrics

Documentation

Filter by

Application Note (15)

Connecting TFT LCD with LCD controller of LPC MCU[AN12027]

AN_LPC177x_8x_Secondary_USB_Host_Bootloader[AN11628]

AES encryption and decryption software on LPC microcontrollers[AN11241]

Guidelines for full-speed USB on NXP's LPC microcontrollers[AN11392]

Interrupt handling during IAP calls for LPC177x_8x and LPC407x_8x[AN11333]

Using the LPC178x/7x power modes[AN11096]

Memory to DAC data transfers using the LPC1700's DMA[AN10917]

I2C secondary boot loader[AN11258]

How to implement the PMBus software stack[AN11318]

LPC1700 secondary USB bootloader[AN10866]

SPI secondary boot loader[AN11257]

BLDC motor control with LPC1700[AN10898]

Migrating from the LPC177x/8x to LPC407x/8x[AN11335]

UUencoding for UART ISP[AN11229]

PCB layout guidelines for NXP® MCUs in BGA packages[AN10778]

Brochure (1)

MCUs with external memory bus, Ethernet, USB, and optional LCD[LPC177XLPC178X]

Data Sheet (1)

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG; Ethernet; LCD; EMC[LPC178X_7X]

Errata (1)

Errata sheet LPC177x/8x[ES_LPC177X_8X]

Package Information (1)

plastic low profile quad flat package; 208 leads; body 28 x 28 x 1.4 mm[SOT459-1]

Supporting Information (2)

ADC design guidelines[TN00009]

Footprint for wave soldering[HTQFP-HLQFP-LQFP-MSQFP-WAVE]

User Guide (1)

LPC178x/7x User manual[UM10470]

Design Resources

Design Files

Filter by

BSDL for LPC177x and LPC178x

IBIS models for LPC178x pkg LQFP-208

IBIS models for LPC178x pkg TFBGA-208

BSDL for LPC177x and LPC178x pkg TFBGA

BSDL for LPC177x and LPC178x pkg TFBGA180

BSDL for LPC177x and LPC178x pkg LQFP144

Filter By

Hardware

Filter By

Filter By

Software

Filter by

MCUXpresso Integrated Development Environment (IDE)Featured

AN10859 - LPC1700 Ethernet MII Management (MDIO) via software

Filter By

Engineering Services

Filter by

Training

Filter by

Filter by

Scalable Mainstream 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core

PCB layout guidelines for NXP^® MCUs in BGA packages[AN10778]