LPC1313FHN33 | Arm Cortex-M3 | 32-bit MCU

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

The LPC1313FHN33 is an Arm Cortex-M3 based microcontroller for embedded applications featuring a high level of integration and low power consumption. The Arm Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The Arm Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The Arm Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.

See product image

Data Sheet

Application Notes

Product Details

Features

10-bit ADC with input multiplexing among 8 pins
Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
Arm Cortex-M3 processor, running at frequencies of up to 72 MHz
Code Read Protection (CRP) with different security levels
GPIO pins can be used as edge and level sensitive interrupt sources
High-current output driver (20 mA) on one pin
High-current sink drivers (20 mA) on two I²C-bus pins in Fast-mode Plus
In-Application Programming (IAP)
In-System Programming (ISP)
Integrated oscillator with an operating range of 1 MHz to 25 MHz
Power-On Reset (POR)
Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
Serial Wire Debug and Serial Wire Trace port
Single power supply (2.0 V to 3.6 V)
Three reduced power modes: Sleep, Deep-sleep, and Deep power-down
Device serial number for identification

Target Applications

Alarm systems
eMetering
Lighting
White goods

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

4 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
IBIS models for LPC13xx pkg LQFP-48

ZIPRev 1Jun 13, 2017 16:19:0084.2 KBIBIS_LPC13xx_LQFP-48
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Models
IBIS models for LPC13xx

ZIPRev 1Jun 13, 2017 16:19:0084.2 KBIBIS_LPC13xx
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC13xx ORCAD symbols

ZIPRev 0Jun 3, 2016 00:00:002.9 KBLPC13XX-ORCAD-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
LPC13xx Eagle symbols

ZIPRev 0Jun 3, 2016 00:00:005.3 KBLPC13XX-EAGLE-SYM

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

4 hardware offerings

Emulators, Probes, and Programmers
Universal Multilink Development Interface
Active

UMultilink
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
Active

U-MULTILINK-FX
Additional hardware available. View our featured partner solutions.
Emulators, Probes, and Programmers
PEmicro Cyclone programmer
Active

CYCLONE

1-5 of 10 hardware offerings

Test Accessories and Debugger
Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the program...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher Portable PLUS

Flasher Portable PLUS is an extremely portable flash programmer, specifically designed to meet the needs of production-grade flash programming in the field.

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link PRO PoE

J-Link PRO PoE is a specialized programming / debug probe for creating test farms. It can draw power via Ethernet and supplies power to the target either via debug interf...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link PRO

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This ...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher Hub-12

The Flasher Hub-12 controls up to 12 Flasher Compacts so that they program simultaneously, creating a powerful gang programmer for efficient high-speed parallel programmi...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link EDU Mini

The J-Link EDU Mini is a stripped-down, budget-friendly model of the J-Link debug probe created for educational use. Even with its reduced size, it maintains most J-Link ...

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher PRO

Flasher PRO is SEGGER’s “almost-anything” flash programmer for microcontrollers, SoCs, and (Q)SPI flashes.

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
Flasher ATE

Flasher ATE is perfectly suited for high volume mass production environments.

By SEGGER Microcontroller GmbH Gold Partner
Test Accessories and Debugger
J-Link ULTRA+

The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Brea...

By SEGGER Microcontroller GmbH Gold Partner

Show All

To find additional partner offerings that support this product, visit our Partner Marketplace.

Engineering Services

To get further assistance directly from NXP, please see our Engineering Services.

3 engineering services

Independent Design House (IDH)
Debug Tool development

By Ashling Microsystems GoldHQ: Limerick, IrelandSupporting Regions: EMEA
Independent Design House (IDH)
Wireless and Antenna Design

By Bluewind GoldHQ: Castelfranco Veneto, ItalySupporting Regions: EMEA
Independent Design House (IDH)
IDE development

By Ashling Microsystems GoldHQ: Limerick, IrelandSupporting Regions: EMEA

To find additional partner offerings that support this product, visit our Partner Marketplace.

Training

8 trainings

On-Demand
Advanced wolfSSL for Embedded Security

12 hrBy AC6-Training Gold Partner

On-Demand
Developing with Arm Cortex-M

35 hrBy Doulos Ltd Gold Partner

On-Demand
wolfSSL for Embedded Security

18 hrBy AC6-Training Gold Partner

On-Demand
C++ Programming for Embedded Systems ONLINE

30 hrBy Doulos Ltd Gold Partner

On-Demand
Advanced Embedded Systems Security

12 hrBy AC6-Training Gold Partner

On-Demand
C Programming for Embedded Systems ONLINE

30 hrBy Doulos Ltd Gold Partner

On-Demand
Writing Secure C/C++ code

18 hrBy AC6-Training Gold Partner

On-Demand
Embedded System Security for C/C++ Developers ONLINE

24 hrBy Doulos Ltd Gold Partner

Show All

Entry-level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core

Product Details

Features

Target Applications

Applications

Automotive

Consumer

Industrial

Buy/Parametrics

Documentation

Filter by

Application Note (21)

AN1902: Assembly Guidelines for QFN and SON Packages Application Note[AN1902]

IR remote controller/receiver solution for Windows Media Center[AN11551]

AES encryption and decryption software on LPC microcontrollers[AN11241]

Guidelines for full-speed USB on NXP's LPC microcontrollers[AN11392]

FM+ I2C on LPC1300[AN10900]

Decoding DTMF tones using M3 DSP library FFT function[AN10943]

How to implement the PMBus software stack[AN11318]

USB HID with the LPC1300 on-chip driver[AN10904]

UUencoding for UART ISP[AN11229]

DSP library for LPC1700 and LPC1300[AN10913_CM3_DSP_LIBRARY_V1_0_0]

AN11031 - PCB layout and ADC circuit recommendations for LPC1100 and LPC1300 (with software)[AN11031V1]

Using the LPC13xx low power modes and wake-up times on the LPCXpresso[AN10973]

AN10973 - Using the LPC13xx low power modes and wake-up times on the LPCXpresso[AN10973_-_USING_THE_LPC13XX_LO]

AN10986 - USB In-system programming with the LPC1300[AN10986_-_USB_IN-SYSTEM_PROGRA]

AN10955 - Full-duplex software UART for LPC111x and LPC13xx[AN10955_-_FULL-DUPLEX_SOFTWARE]

USB In-System Programming with the LPC1300[AN10986]

Using Code Read Protection in LPC1100 and LPC1300[AN10968]

Full-duplex software UART for LPC111x and LPC13xx[AN10955]

DSP library for LPC1700 and LPC1300[AN10913]

Using M3 DSP library filter functions[AN10934]

AN10905 - LPC1300 USB memrom[AN10905_LPC1300_USBMEMROM]

Brochure (3)

Low-cost Cortex-M0 USB solutions with Smart Card interface[LPC11U00]

Low-cost development platform for 32-bit LPC microcontroller family; NXP LPCXpresso[75016842]

Low-power Cortex-M3 based microcontrollers simplify USB designs; NXP® 72 MHz, 32-bit Cortex-M3™ microcontrollers LPC1300[75016895]

Data Sheet (1)

32-bit ARM Cortex-M3 microcontroller; up to 32 kB flash and 8 kB SRAM; USB device[LPC1311_13_42_43]

Errata (2)

Errata sheet LPC1311/01; LPC1313/01[ES_LPC131X_01]

Errata sheet LPC1311/13[ES_LPC1311_13]

Package Information (1)

plastic thermal enhanced very thin quad flat package; no leads; 32 terminals; body 7 x 7 x 0.85 mm[SOT865-3]

Training Presentation (1)

Driving the LPC1300 with Murata resonators[R_10003]

User Guide (1)

LPC1311/13/42/43 User manual[UM10375]

Design Resources

Design Files

Filter by

IBIS models for LPC13xx pkg LQFP-48

IBIS models for LPC13xx

LPC13xx ORCAD symbols

LPC13xx Eagle symbols

Filter By

Hardware

Filter By

Filter By

Software

Filter By

Filter By

Entry-level 32-bit Microcontroller (MCU) based on Arm^® Cortex^®-M3 Core

Low-power Cortex-M3 based microcontrollers simplify USB designs; NXP^® 72 MHz, 32-bit Cortex-M3™ microcontrollers LPC1300[75016895]