Ultra-Reliable MPC563xM for Automotive and Industrial Engine Management
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
SBC Gen2 with High-Speed CAN and LIN
The NXP MC33905 is part of a second generation family of system basis chips, combining multiple features and enhanced module design.
- The MC33905 works as an advanced power management unit for the MCU and additional integrated circuits such as sensors and CAN transceivers
- Built-in enhanced high-speed CAN interface (ISO11898-2 and -5), with local and bus failure diagnostics, protection and fail-safe operation mode.
- The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches
- Includes 2 or 3 wake-up input pins than can also be configured as output drivers for flexibility
Freescale MC33905 Product Image
Product Details
Features
Key Features
- Voltage regulator for MCU, 5.0 V or 3.3 V, part number selectable, with possibility of usage external PNP to extend current capability and share power dissipation
- Voltage, current and temperature protection
- Very low quiescent current in low-power modes
- Fully-protected embedded 5.0 V regulator for the CAN driver
- Multiple under-voltage detections to address various MCU specifications and system operation modes (i.e. cranking)
- Auxiliary 5.0 V or 3.3 V SPI configurable regulator, for additional ICs, with over-current detection and under-voltage protection
- MUX output pin for device internal analog signal monitoring and power supply monitoring
- Advanced SPI, MCU, ECU power supply and critical pins diagnostics and monitoring
- Multiple wake-up sources in low-power modes: CAN or LIN bus, I/O transition, automatic timer, SPI message and VDD over-current detection
- ISO11898-5 high-speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
Related products
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
10 documents
Compact List
Application Note (5)
Brochure (1)
-
Safety System Basis Chip for Automotive Brochure[SBCAUTOBRA4]
Data Sheet (1)
-
MC33903-MC33904-MC33905, System Basis Chip Gen2 with High Speed CAN and LIN Interface - Data Sheet[MC33903-MC33904-MC33905]Featured
Errata (1)
-
MC33903, MC33904, and MC33905, Mask M87W, Rev. 3.2 Errata[MC33903_4_5ER]Featured
Selector Guide (1)
-
Analog Automotive and Industrial Selector Guide[INDCONTANLPRDFL]
User Guide (1)
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 13 hardware offerings
-
Evaluation and Development BoardsEvaluation Kit - USB-SPI Interface, MC68HC908JW32, DongleFeatured
Active -
Evaluation and Development BoardsEvaluation Kit for 33905D3 System Basis Chip Gen2 with CAN and LINFeatured
Active -
Evaluation and Development BoardsMPC5606B 3-phase BLDC Development KitFeatured
-
Evaluation and Development Boards
Evaluation Kit - 33905D5, SBC Gen2 with CAN and LINFeatured
Active -
Evaluation and Development BoardsMPC5604P StarterTRAK Development KitFeatured
Active
Software
Quick reference to our software types.
1 software file
-
Configuration Tools
SPI Generator (SPIGen) Software
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
2 engineering services
-
Original Design Manufacturer (ODM)
Hardware and Software Engineering Services
-
Independent Design House (IDH)
Hardware/Software Engineering Services
To find additional partner offerings that support this product, visit our Partner Marketplace.