MCX C04x MCUs with Arm® Cortex® M0+, Entry Level MCUs with Classical Peripherals
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
LPC860: 32-Bit Arm® Cortex®-M0+-Based Low-Cost MCU with I3C Interface
The LPC860 32-bit Arm Cortex-M0+ based cost effective MCUs are designed for Industrial and IoT applications. LPC860 operates at a frequency of up to 60 MHz and supports up to 64KB of flash memory and up to 8 KB SRAM. This family features a power-optimized core, small footprint in popular packages and level shifting options thanks to its separate power rails.
The peripheral complement of the LPC860 includes a CRC engine, I²C-bus interface, I3C-bus interface, up to three USARTs, two SPI interface, one multi-rate timer, self-wake-up timer, two FlexTimer with hardware dead-time insertion and quadrature decoding, one 12-bit ADC, one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine and up to 54 general-purpose I/O pins.
The LPC860 family are supported by the MCUXpresso ecosystem, which includes an SDK, a choice of IDEs, and secure provisioning and configuration tools to enable rapid development.
Product Details
Features
System
- Arm Cortex-M0+ processor (revision r0p1), running at frequencies of up to 60 MHz with single-cycle multiplier and fast single-cycle I/O port
- Arm Cortex-M0+ built-in nested vectored interrupt controller (NVIC)
- System tick timer
- AHB multilayer matrix
- Serial wire debug (SWD) with four break points and two watchpoints
Memory
- 64 kB Flash, small 64 B page size suitable for EEPROM emulation
- 8 kB RAM (Logic for Bit banding across all of SRAM)
Exceptional Power Efficiency in Low-current Mode Using the FRO as the Clock Source
- Free running oscillator (FRO)
- Four power modes
- Power profile APIs for simple runtime power optimization
FAIM is Used to Configure the Part at Start-up
- Pin configuration including direction and pull-up or pull-down
- Clocks and PMU for low-power start-up
Full Range of Timing Features from Basic to Advanced
- FlexTimer with a total of 10 channels. Hardware dead-time insertion and quadrature decoding for motor control
- Multi-rate timer (MRT) for repetitive interrupt generation at up to four programmable, fixed rates
- Self-wake-up timer (WKT) clocked from either Free Running Oscillator (FRO), a low-power, low-frequency internal oscillator or an external clock input
- Windowed watchdog timer (WWDT)
Accurate 1.9-Msps ADC: 12 ch, 12-bit
- Ideal for oversampling to improve conversion accuracy
- Flexible triggers to optimize power use
More Serial Connectivity
- 1x I3C (support > 10MHz), compatible with I²C
- 1 x I²C
- 2 x SPI, 3 x UART
- 54 GPIO with switch matrix, support input pattern match engine
Related products
LPC810 and LPC830: 32-Bit Arm® Cortex®-M0+-Based Low-Cost MCU
MCX A13x, 14x, 15x MCUs with Arm® Cortex® M33, Scalable Device Options, Low Power and Intelligent Peripherals
LPC820: 32-Bit Arm® Cortex®M0+-Based Low-Cost MCU
MCX C14x/24x/44x MCUs with Arm® Cortex® M0+, Entry level MCUs with USB, Segment LCD and Classical Peripherals
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-10 of 34 documents
Compact List
Application Note (22)
-
LPC86x FlexTimer Module Feature[AN14024]
-
AN13952: How to Use I3C in LPC86x[GS-AN13952-NDF]
-
How to Use I3C in LPC86x[AN13952]
-
How to Migrate LPC84x to LPC86x[AN13803]
-
LPC86x UART receive IDLE interrupt[AN13833]
-
Switch matrix usage on LPC86x[AN13832]
-
ACMP Usage for LPC86x[AN13905]
-
Programming LPC800 Using USART ISP[AN13815]
-
ADC Usage for LPC86x[AN13906]
-
LPC86x I2C Secondary Bootloader[AN13843]
-
LPC86x SPI Secondary Bootloader[AN13867]
Application Note Software (5)
-
Application note software for AN13843[AN13843SW]
-
Application note software for AN13867[AN13867SW]
-
Application note software for AN13790[AN13790SW]
-
Application note software for AN13815[AN13815SW]
Brochure (1)
-
LPC800 Brochure[LPC800MICRBRA4]
Data Sheet (1)
-
LPC86x Data Sheet[LPC86x]
Fact Sheet (1)
-
LPC800 Series MCUS Fact Sheet[LPC800FS]
Reference Manual (1)
-
LPC86x User manual[UM11607]
User Guide (1)
-
LPC86x Hardware Design Guide[LPC86XHDG]
User Manual (1)
-
LPCXpresso860-MAX Board User Manual[LPCXpresso860-MAXUM]
White Paper (1)
-
LPC865 MCU - An I3C IO Bridge Solution[LPC865WP]
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 9 hardware offerings
-
Design ConceptSmart Battery Charger Based on LPC860 MCUs
-
Design Concept
Smart Lighting Design Based on LPC860 MCUs
-
Design Concept
PC Accessory SDRAM Module Controller Based on LPC860 MCUs
-
Additional hardware available. View our featured partner solutions.
-
Design Concept
Motor Control Design Based on LPC860 MCUs
-
Emulators, Probes, and ProgrammersUniversal Multilink Development Interface
Active
Software
Quick reference to our software types.
1-5 of 8 software files
-
BSPs and Device Drivers
Open-CMSIS-Packs
-
BSPs and Device Drivers
MCUXpresso Config Tools: Pins, Clocks and Peripherals
-
Examples and Quick Start Software
MCUXpresso Software Development Kit (SDK)
-
Additional software available. View our featured partner solutions.
-
Debugging and Visualization Tools
LinkServer for Microcontrollers
-
Debugging and Visualization Tools
FreeMASTER Run-Time Debugging Tool
Note: For better experience, software downloads are recommended on desktop.
