NTAG® 5 Switch: NFC Forum-Compliant PWM GPIO Bridge for Lighting and Gaming
Design Files
Receive the full breakdown. See the product footprint and more in the eCad file.
Low-Cost Microcontrollers (MCUs) based on Arm® Cortex®-M0+ Core
LPC8N04 is a cost-effective MCU which serves as an entry-level connectivity solution for embedded applications with integrated NFC connectivity. The LPC8N04 MCU contains multiple features, including several power-down modes and a selectable CPU frequency of up to 8 MHz for ultra-low power consumption. The peripheral complement of the LPC8N04 MCU includes 32 kB of flash memory, 8 kB of SRAM, 4 kB of EEPROM, one I²C, one SPI/SSP, and up to 12 general purposes I/O pins.
Product Details
Features
System
- Arm® Cortex®-M0+ core running at frequencies of up to 8 MHz
- Nested Vectored Interrupt Controller (NVIC)
- Arm Serial Wire Debug (SWD)
- System tick timer
- IC reset input
Memory
- 32 kB on-chip flash programming memory
- 8 kB SRAM
- 4 kB on-chip EEPROM
Digital peripherals
- Up to 12 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and repeater mode
- GPIO pins which can be used as edge and level sensitive interrupt sources
- High-current drivers/sinks (20 mA) on four GPIO pins
- High-current drivers/sinks (20 mA) on two I²C-bus pins
- Programmable Watchdog Timer (WDT)
- Real-Time Clock (RTC) Timer
Communication interfaces
- NFC/RFID ISO 14443 type A interface
- Serial I²C-bus supporting full I²C-bus specification and Fast-mode with a data rate of 400 kbit/s, with multiple address recognition and monitor mode
- SPI/SSP interface
Clock generation
- 8 MHz internal RC oscillator, trimmed to 2% accuracy, which is used for the system clock
- Timer oscillator operating at 32 kHz linked to the RTC timer unit
Power control
- Support for 1.72 V to 3.6 V external voltages
- The LPC8N04 can also be powered from the NFC field
- Activation via NFC
- Integrated Power Management Unit (PMU) for versatile control of power consumption
- Four reduced power modes for Arm Cortex-M0+: sleep, deep-sleep, deep power-down and battery-off
- Power gating for each analog peripheral for ultra-low power operation
- < 50 nA IC current consumption in Battery-off mode at 3.0 V
- Power-On Reset (POR)
Additional features
- Temperature sensor with +/- 1.5°C accuracy from
- 40°C to 85°C - Unique device serial number for identification
Related products
NTAG I²C Plus 2K: NFC Forum Type 2 Tag with I²C Interface
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types.
1-10 of 11 documents
Compact List
Application Note (3)
Brochure (1)
-
LPC800 Brochure[LPC800MICRBRA4]
Data Sheet (1)
Errata (1)
-
LPC8N04 Errata Sheet[ES_LPC8N04]
Fact Sheet (2)
-
LPC800 Series MCUS Fact Sheet[LPC800FS]
-
LPC8N04 MCUs with Integrated NFC Technology[LPC8N04FS]
User Guide (2)
-
LPC8N04 User manual[UM11074]
White Paper (1)
-
LPC8N04NFCWP Whitepaper[LPC8N04NFCWP]
Design Resources
Hardware
Quick reference to our
board types.
1-5 of 11 hardware offerings
-
Evaluation and Development BoardsLPC8N04 Development Board for LPC8N04 MCUFeatured
Active -
Emulators, Probes, and ProgrammersUniversal Multilink Development Interface
Active -
Emulators, Probes, and ProgrammersMCU-Link Debug Probe
Active -
Additional hardware available. View our featured partner solutions.
-
Emulators, Probes, and ProgrammersPEmicro Cyclone programmer
Active -
Emulators, Probes, and ProgrammersPEmicro Cyclone FX programmer
Software
Quick reference to our software types.
1-5 of 9 software files
-
Examples and Quick Start Software
MCUXpresso Software Development Kit (SDK)Featured
-
BSPs and Device Drivers
Open-CMSIS-Packs
-
BSPs and Device Drivers
MCUXpresso Config Tools: Pins, Clocks and Peripherals
-
Additional software available. View our featured partner solutions.
-
Code Snippets
LPC8N04 NFC Demo (Android version)
-
Code Snippets
LPC8N04 NFC Demo source code (iOS)
Note: For better experience, software downloads are recommended on desktop.
Engineering Services
To get further assistance directly from NXP, please see our Engineering Services.
4 engineering services
-
Independent Design House (IDH)
Debug Tool development
-
Independent Design House (IDH)
Graphic Design
-
Independent Design House (IDH)
Wireless and Antenna Design
-
Independent Design House (IDH)
IDE development
To find additional partner offerings that support this product, visit our Partner Marketplace.
Training
3 trainings